News & Events

Rodent Model for Orthotopic Implantation of Engineered Liver Devices

Veryst supports bioengineering study of new surgical technique, just published

January 17, 2023
Veryst is proud to have supported 3D BioLabs LLC with a study described in its recent publication titled “Rodent Model for Orthotopic Implantation of Engineered Liver Devices.” The publication presents a novel surgical technique to provide blood supply to implanted cellularized devices that augment or replace liver tissue function.
FEA simulation of syringe stopper deformation

Conference presentation on simulation and testing for combination product design

April 22, 2024
Dr. Matthew Hancock and Dr. Sean Teller will be speaking at the Pre Filled Syringes and Injectable Drug Devices East Coast conference to be held in Boston, MA. They will talk about “Multiphysics Simulation and Testing in Combination Product Design & Verification: Reducing Patient Risk.” They will then participate in a panel discussion.
Impact failure of a thermoplastic material

Course on crucial techniques for high-rate mechanical testing

April 17, 2024
Dr. Sean Teller taught an online, 90-minute course on High Rate Mechanical Testing of Polymer Materials for Finite Element Simulation. He explained how to overcome challenges when conducting high-rate mechanical testing of polymer materials to produce accurate results and successful simulations.
Logo for Adhesion Society's Annual Meeting 2024

Veryst engineers present at 2024 Adhesion Society Annual Meeting

February 11, 2024
Dr. Mark Oliver spoke about “Modeling Fatigue Debonding of Adhesives in E-Mobility Battery Packs” and Dr. Scott Grindy spoke about “Computer Vision-Enhanced Measurement of Adhesive Toughness at Impact Rates” at this in-person event in Savannah, Georgia.
Creep test data at three different temperatures left); the master curve at 25°C generated by applying TTS analysis to the creep data at 30, 40, and 50°C (right)

Article on time-temperature superposition published in Rubber World

January 29, 2024
Veryst engineers explain the advantages of time-temperature superposition (TTS) in this new article, just published. TTS is an advanced thermomechanical analysis method that allows rubber scientists and engineers to extrapolate the mechanical properties of polymeric materials to long times or high frequencies by using tests that last less than a day.
Modeling Eddy Current webinar

Webinar on Modeling Eddy Current Inductive Sensors in COMSOL Multiphysics

January 25, 2024
Dr. Nirmal Paudel presented a free, one-hour webinar on Modeling Eddy Current Inductive Sensors in COMSOL Multiphysics. He demonstrated a workflow for designing an eddy current sensor for nondestructive testing using the COMSOL Multiphysics software and its parametric sweep and optimization functionality for frequency domain simulations.
Images highlighting Veryst's free webinar series

Veryst is offering new, free, monthly webinars!

January 17, 2024
Veryst is pleased to add new offerings to our webinar series, focusing on our consultants' expertise in polymer mechanics, experimental testing, and multiphysics simulation.  Registration is now open!
Logo for ASC webinar on Advanced Testing and Simulation of Bonded Structures

Webinar on Advanced Testing and Simulation of Bonded Structures

November 15, 2023
Dr. Mark Oliver and Dr. Scott Grindy offered a webinar hosted by the Adhesives and Sealants Council. They discussed methods for characterizing the mechanical behavior of adhesive materials and adhesive joints to take advantage of FEA, identified strategies for modeling adhesive joints and described the pros and cons of each, and much more.
Testing-related images introducing new webinar series

Introducing our new, free, monthly webinar series!

September 28, 2023
Veryst’s new "In the Test Lab" webinar series focuses on polymer mechanics and experimental testing and features various experimental methods, test systems, and more. The first three webinars are now open for registration.

Can we help? Just want to keep in touch?