Brown, S. (with B. Hendrickson) "Harvest of Motion," Mechanical Engineering Magazine, Vol. 130, No. 9, September 2008

Brown, S. (with J. Bergstrom) "Modeling of Fluoropolymer Deformation," Fluoropolymers Applications in Chemical Processing Industries, Chapter 11, Sina Ebnesajjad (ed.), 2004

Brown, S. (with J. Bergstrom) "FRP Flumes: Repeated Impact," Composite Manufacturing Magazine, April 2004

Brown, S. (with Mendez, P.) “Putting it in Scale,” Mechanical Engineering Design Magazine, February 2004.

Brown, S. “Reliability of Microelectromechanical Systems (MEMS),” Mechanical Engineering Magazine, October 2003.

Brown, S. (with Mendez, P. and Rice, C.) “Joining Using Semisolid Metals,” Welding Journal, Vol. 81, No. 9, pp. 181s-187s, 2002.

Brown, S. (with Muhlstein, C.) “Mechanical Properties of Structural Films,” Standard Technical Publication 1413, American Society for Testing and Materials, 2001.

Brown, S. (with Rice, C. and Mendez, P.) “Metal Solid Freeform Fabrication Using Semi-
Solid Slurries,” Journal of Metals, Vol. 52, No. 12, pp. 31-33, December 2000.

Brown, S. (with Gally, B. and Abnet, C.) “Investigation of Wear of Microelectromechanical Contacts,” Proceedings, Materials Research Society Symposium, Materials Science of Microelectromechanical Systems (MEMS) Devices II, pp. 117-122, November 29-December 1, 1999.

Brown, S. (with Van Arsdell, W.) “Subcritical Crack of Growth in Silicon MEMS,” IEEE Journal of Microelectromechanical Systems, Vol. 46, No. 5, October 1999.

Brown, S. “Powder Forging,” Encyclopedia of Materials, M. Flemings (ed.), Pergamon Press, New York, NY, 1994.

Bergstrom, J.S. (with J.E. Bischoff) "An advanced Thermomechanical Constitutive Model for UHMWPE," Int. J. Structural Changes in Solids, Vol 2, No 1, pp. 31-39, 2010.

Bergstrom, J.S. (with S. Chakrabarti-Bell, E. Lindskog, T. Sridhar) "Computational modeling of dough sheeting and physical interpretation of the non-linear rheological behavior of wheat flour dough," J. Flood Engineering, Vol 100, pp. 278-288, 2010.

Bergstrom, J.S. “Modeling of the Dynamic Thermomechanical Response of Elastomers,” Tire Science and Technology, Vol. 33, No. 2, pp. 120-134, 2005.

Bergstrom, J.S. (with Hilbert, L.B.) “A Constitutive Model for Predicting the Large Deformation Thermomechanical Behavior of Fluoropolymers,” Mechanics and Materials, Vol. 37, pp. 899-913, 2005.

Bergstrom, J.S. (with Rimnac, C.M. and Kurtz, S.M.) “An Augmented Hybrid Constitutive Model for Simulation of Uploading and Cyclic Loading Behavior of Conventional and Highly Crosslinked UHMWPE,” Biomaterials, Vol. 25, pp. 2171-2178, 2004.

Bergstrom, J.S. “Modeling and Mechanical Analysis of Fluoropolymer Components,” In: Fluoropolymers Applications in Chemical Processing Industries. Sina Ebnesajjad (ed.), Plastics Design Library, Williams Andrew Publishing, 2004.

Bergstrom, J.S. (with Boyce, M.C.) “Constitutive Modeling of the Time-dependent and Cyclic Loading of Elastomers and Application to Soft Biological Tissues,” Mechanics of Materials, Vol. 33, pp. 523-530, 2001.

Selected Publications - Nagi H. Elabbasi, Ph.D.

Elabbasi, N (with H. Zhang, X. Zhang, S. Ji, Y. Guo, G. Ledezma, and H. deCougny) “Recent development of fluid–structure interaction capabilities in the ADINA system”, Computers & Structures, 81, 1071-1085, 2003.

Elabbasi, N (with S.A. Meguid and S.S. Cheon) “Finite Element Modelling of Deformation Localisation in Metallic Foams”, Finite Elements in Analysis and Design, 38, 631-643,2002.

Elabbasi, N (with K.J. Bathe) “Stability and Patch Test Performance of Contact Discretizations and a New Solution Algorithm”, Computers & Structures, 79: 1473-1486, 2001.

Elabbasi, N (with S.A. Meguid and A. Czekanski) “On the Modelling of Smooth Contact Surfaces using Cubic Splines”, Int. J. for Numerical Methods in Engineering, 50, pp.953-967, 2001

Elabbasi, N (with S.A. Meguid and A. Czekanski) “Three-Dimensional Finite Element Analysis of Saddle Supported Pressure Vessels”, Int. J. Mech. Science, 43, pp.1229-1242, 2001

Elabbasi, N (with S.A. Meguid) “A New Shell Element Accounting for Through-Thickness Deformation”, Computer Methods in Applied Mechanics and Engineering, 189, pp.841-862, 2000.

Elabbasi, N (with J.S. Cirne and S.A. Meguid) “Numerical and Experimental Investigations of Contact in Thin and Thick Rings”, Int. J. Mech. Sci., 41, pp. 1051-1066, 1999.

Selected Publications - David J. Quinn, Ph.D.

Quinn, D.J. (with I. Pivkin, S. Wong, K. Chiam, M. Dao, et al.) "Combined Simulation and Experimental Study of Large Deformation of Red Blood Cells in Microfluidic Systems," Annals of Biomedical Engineering, vol. 39, number 3, pp. 1041-1050, 2011.

Quinn, D.J. (with R. Chandramohanadas, Y. Park, L. Lui, A. Li, K Liew, M. Diez- Silva,
Y. Sung, Ming Dao, C. T. Lim, P. R. Preiser & S. Suresh) “Biochemistry and Biophysics of Malarial Parasite Exit from Infected Erythrocytes,” Submitted to PLoS ONE, January 2011.

Quinn, D.J. (with N. Yamamoto, N. Wicks, J. Hertz, J. Cui, H. Tuller, and B. Wardle) "Non-linear design for microfabricated large-area self-supported thin plates in the post-buckling regime,” Journal of Micromechanics and Microengineering, vol. 20, pp. 35027, 2010.

Quinn, D.J. (with B. Wardle, and S. M. Spearing) "Residual stress and microstructure of as-deposited and annealed, sputtered yttria-stabilized zirconia thin films," Journal of Materials Research, vol. 23, pp. 609-618, 2008.

Quinn, D.J. (with J. P. Mills, M. Diez-Silva, M. Dao, M. Lang, K. S. Tan, C. T. Lim, G. Milon, P. H. David, O.Mercereau-Puijalon, S. Bonnefoy, and S. Suresh) "Effect of plasmodial RESA protein on deformability of human red blood cells harboring Plasmodium falciparum," Proc Natl Acad Sci USA, vol. 104, pp. 9213-7,

May 29 2007.

Quinn, D.J. (with S. M. Spearing, N. A. Fleck, and M. F. Ashby) "A systematic approach to process selection in MEMS," Journal of Microelectromechanical Systems, vol. 15, pp. 1039-1050, 2003.

Selected Publications - Samuel Chow, Ph.D.

Yea, Chow, Small, Einhorn, Lambrecht, “Novel Approach to Closing Anular Defects: A Biomechanics Study”, Spine Arthroplasty Society, 2005.

Chow, S., Lussier, D., "Shear and Friction Response of CO-Mingled Glass/Polypropylene Fabric during Stamping", ASC 15th Technical Conference, 2001, Blacksburg, VA.

Chan, J., Chow, S. "Transverse Thermal Conductivity and Friction Test Design for Woven
Thermoplastic Preforms", 32th International SAMPE Technical Conference, Nov 5-9, 2000, Boston Park Plaza Hotel, Boston, MA.

Chan, J., Sherwood, J.A., Buso, P., Chow, S., Lussier, D., "Stamping of Continuous Fiber of Thermoplastic Composites”, Polymer Composites, Aug 2000, Vol. 21, No. 4.