Material Model Validation

Once a material model has been selected and calibrated to the test data, Veryst recommends validating the model by performing a test with a stress state different from any used for calibration.  This test can be complex and include inhomogeneous deformation.  Such a test ensures that the model can accurately represent the material in load cases other than those encountered during the tests.  We recommend performing, when possible, a test that is representative of the stress state the product will experience.  Some tests we often recommend are:


Veryst also designs custom test geometries and fixtures to mimic best the stress state of a particular application or problem.  For more information on validation testing, write to us at contact@veryst.com.
 

VNotch Material Model Validation
Shear strain contours computed using digital image correlation (DIC) from an Iosipescu (V-notch) test on a thermoplastic material

 

You may also like...

Polymer Forming Simulation

Obtaining accurate results from finite element analyses of polymers is not easy. Polymers are often highly temperature- and rate-dependent, exhibiting significant stress-relaxation, creep, and recovery. In this forming case study, Veryst examines the steps required to produce an accurate constitutive model of an example polymer, polyether ether ketone (PEEK), and shows the consequences of oversimplification.

Golf Ball Impact Simulation

Accurate simulation of golf ball behavior during impact with a club is challenging due to the nonlinear impact event, the complexity of the polymeric ball material at the high strain rates experienced during impact, and the scarcity of material properties at these high strain rates. Veryst Engineering developed an accurate model that accounts for these complexities.

Polymer Foam Testing & Modeling

Polymer foams may exhibit extreme strain rate-dependence due to their structure. The low stiffness means testing the materials at high strain rates is particularly difficult. Veryst has developed multiple test methods to test and model these materials.

Can we help? Just want to keep in touch?