Shopping cart is empty.

Explore By

UT001 – Tensile testing:

Monotonic to failure


A uniaxial tensile test is performed at a given crosshead speed. Strain is measured using an extensometer (clip-on or non-contact, laser) or Digital Image Correlation (DIC). Testing can be done according to ASTM D638, ISO 527, or other relevant tensile testing standard. Veryst Engineering is ISO 17025:2005 accredited to perform this test according to ASTM D638 and ASTM D1708.

Example Data


Temperature Options

This test can generally be performed at any temperature between -80ºC and 280ºC.

  • CT: Cryogenic temperatures (-80ºC to 20ºC)

  • RT: Room temperature (~ 20ºC)

  • HT: High temperatures (20ºC to 280ºC)

Note: The use of the temperature chamber for high and low temperature tests limits the crosshead displacement for these tests.  Some combinations of material, temperature and specimen geometries may not be possible to complete to failure.

Strain Rates

Strain rates up to ~ 1/s are possible, depending on specimen geometry.

Applicable Standards

ASTM D638, ISO 527

Data Provided

Time, Engineering Strain, Engineering Stress, Load, Crosshead Displacement, Extensometer Measurement

Values Reported

Elastic Modulus, Yield Strength (0.2% offset), Ultimate Tensile Strength, Strength at Break, Extension at Break

Specimen Requirements

ASTM D638 or ISO 527 "dog-bone" geometries are preferred. Comparable non-standard dog-bone or cylindrical geometries are also possible.

Note that we request extra specimens to ensure a sufficient supply of specimens for valid testing.

Veryst can also assist in molding standard and non-standard test specimens.  Please contact us if you are interested in discussing this option.

Replicates Recommended


More Information

For a customized quotation, please click the button below and indicate the Test ID (e.g., UT001, UT002), type of material, test temperatures and any other details (specimen geometries available, other unique constraints, etc.)

Call Us

To contact Veryst, please call: