Free, One-hour Webinar
This free, one-hour webinar will address the basics of how a dynamic mechanical analysis (DMA) instrument can be used to measure the temperature- and time-dependent properties of materials. It will then examine time-temperature superposition, a technique for extrapolating the mechanical response of polymers to very long times or very high frequencies.
Details
November 19, 2026
1:00 pm – 1:45 pm
Web-based Course
1:45 pm – 2:00 pm
Question and Answer Session
(*EDT – Eastern Daylight Time)
Registration deadline: October 21, 2026
Course Instructor
Scott Grindy, Ph.D.
Lead Engineer
Dr. Scott Grindy is a Lead Engineer at Veryst Engineering. Dr. Grindy’s expertise is in the design of functional polymeric materials through materials chemistry and structure. He has worked extensively with polymeric materials such as soft hydrogels, thermoplastics, photo-curing systems, and biodegradable polymers.
Learning Objectives
- Identify which types of materials have the most to gain from DMA analysis
- Identify which properties can be measured with DMA testing
- Understand how the various modes of DMA testing can help inform design decisions
- Know how to use time-temperature superposition (TTS) to measure the high-frequency or long-time behavior of polymers
Registration
This web-based course is free, but registration is required and class size is limited.
Register at: https://events.teams.microsoft.com/event/3fac9a3c-f3b4-4316-a00a-5da91bf24977@79d1a68e-dd8f-4002-8514-fb1316d42162
If you have any questions, please email us at seminars@veryst.com
Deadline for registration is: Wednesday, November 18, 2026.
Cancellation Policy
Veryst reserves the right to reject registrations and to cancel a webinar based on class size.
Important Information
You will receive an email confirmation and a link to the webinar once your registration ahs been approved. If you don’t see those emails, please check your junk or spam folder.