Description
This test program is recommended for developing a temperature-dependent, linear viscoelastic model of a thermoplastic material. It is assumed that the material is known to be linear viscoelastic. If you do not know whether the material is linear viscoelastic, contact Veryst for more guidance.
Test Program
We recommend the following base tests:
| Test ID | Description | # Temps | # Strain Levels | # Repeats | # Specimens |
|---|---|---|---|---|---|
| UT001 | Tensile test | 3 | 1 | 2 | 6 |
| UT005 | Stress relaxation test | 3 | 2 | 2 | 1 |
Depending on the material, we may also recommend the following additional tests:
| Test ID | Description | # Temps | # Strain Levels | # Repeats | # Specimens |
|---|---|---|---|---|---|
| UC001 | Uniaxial compression test | 3 | 1 | 2 | 2 |
| VC001 | Volumetric compression test | 3 | 1 | 2 | 6 |
| VC005 | Volumetric stress relaxation test | 3 | 2 | 2 | 12 |
Notes:
Specimen Requirements
See the description of individual tests for details on specimen geometries. Note that we request extra specimens to ensure a sufficient supply of specimens for valid testing.
Veryst can also assist in molding standard and non-standard specimens. Please contact us if you are interested in discussing this option.
Material Model Calibration
Veryst can use the above test program to calibrate an appropriate elastic-plastic constitutive model for use in finite element simulations. Veryst can calibrate models built-in to commercial finite element (FE) codes (Abaqus, ANSYS, COMSOL Multiphysics, LS-DYNA, etc.) or advanced models from the PolyUMod® library, which may also be used with most commercial FE codes.
Typical candidate material models include advanced polymer viscoplasticity models [Bergstrom-Boyce, three-network model (TNM), parallel network model (PNM), parallel rheological flow (PRF), etc.] The specific model selected depends on the material behavior and your FE software.
Additional Validation
Veryst can perform additional validation, depending on the target material and the simulation application, through any of the following tests and any necessary component level FE simulation:
More Information
For a customized quotation, please write to us at testing@veryst.com and indicate the Test ID (TP004), type of material, test temperatures, specimen geometries available, or other relevant details.
Browse our library of webinars, whitepapers, and blogs to learn more from our experts on advanced simulations, material modeling, and physical model validations.
Our team of scientists and engineers is ready to help you de-risk unproven technologies, explain complex material behavior, and solve your toughest product challenges.
Veryst is the premier product engineering consulting firm for companies that need the highest level of confidence that their products will work in the real world.