ANSYS

Case study

Cohesive Zone Model (CZM) Calibration
Cohesive zone modeling is a powerful tool for predicting delamination in adhesively bonded structures. Veryst engineers use their expertise in experimental and computational fracture mechanics to calibrate cohesive zone models for accurate prediction of adhesive failure.
Delamination in Microfluidic Valves
A commonly encountered failure mode in microfluidic devices is delamination between adjacent device layers. Veryst examined the influence of control channel geometry on the delamination pressure of a pneumatic microfluidic valve using finite element analysis.
High Rate Foam Testing
Foam materials often exhibit high strain rate sensitivity, with large increases in stiffness as materials are loaded at higher rates. Veryst performed high-rate compression tests of a foam material, reaching impact strain rates of over 1500/s.
High Rate Temperature Response of Polymers
Polymers exhibit significant temperature-dependent mechanical response. Veryst tested a PEEK material at multiple temperatures and calibrated the PolyUMod® Three Network (TN) material model for finite element simulation.
High Strain Rate Testing of Polymers
This case study demonstrates the testing and calibration of a polycarbonate material at a high strain rate of 1000 sec-1. The testing was done with the Split Hopkinson Pressure Bar (SHPB) system and the calibration is performed with the MCalibration® software, originally developed by Veryst Engineering.
Lipid Nanoparticle Self-assembly for mRNA Vaccine Production
Controlling the size of lipid nanoparticles (LNPs) in small-batch pharmaceutical processes is critical for delivery efficiency in mRNA vaccines, cancer therapies, and point-of-care diagnostics. In this case study, Veryst simulated solvent mixing and LNP self-assembly kinetics in a microfluidic mixer to predict the size distribution of LNPs across a range of process flow conditions.
Micromixing in a Multi-Inlet Vortex Mixer
Flash nanoprecipitation (FNP) is a novel method to produce nanoparticles for a variety of applications, including mRNA vaccine manufacturing. This case study demonstrates the high-fidelity prediction of micromixing rates, which are critical to controlling the size distribution of nanoparticles created using FNP.
PEEK Temperature Dependence
PEEK materials are increasingly used in a variety of industries with elevated temperature applications. This example shows how Veryst Engineering developed a temperature-dependent, nonlinear model of PEEK behavior for use in commercial FEA codes.
Peeling of a Soft Polymer Film
The peel test is widely used to measure the adhesion of thin, compliant films to rigid substrates. An accurate model of the peeling mechanics is required to extract the interface adhesion energy. Veryst used the PolyUMod® material model library along with a cohesive zone model of interface adhesion to simulate the peeling of a soft viscoplastic film from a rigid substrate.
Polymer Material Models in Different FE Packages
All commercial FE packages provide material models for polymers, but Veryst Engineering’s PolyUMod® material library has advanced material models at the leading edge of polymer mechanics. We demonstrate the accuracy of a PolyUMod material model with native material models from Abaqus, ANSYS, and LS-DYNA.
Simulation of Heat Transfer From Impinging Turbulent Jets
Arrays of impinging fluid jets are an effective design solution for applications requiring large heat transfer rates. This case study demonstrates the ability of computational fluid dynamics (CFD) to predict heat transfer coefficient distributions and guide design choices to improve cooling uniformity.
Strength of Additively Manufactured Parts
Veryst can predict the ultimate strength and failure modes of design concepts generated using topology optimization and produced using additive manufacturing. We use advanced finite element analysis (FEA) that accounts for the nonlinear behavior of the material being used to make the part.

Service

ANSYS Mechanical Material Models
Veryst has extensive experience selecting and calibrating material models for ANSYS, including the Bergstrom-Boyce model and other metal plasticity models.
Customized Computational Solutions
Veryst uses its extensive expertise in simulation and analysis to develop customized computational solutions. Clients developing new materials or new production processes are at a disadvantage when suitable simulation tools are not yet available. Veryst can develop unique, customized solutions such as simulation applications ("apps"), new material subroutines, and custom algorithms.
Impact Simulation & Testing
Veryst offers expertise in simulation and testing of impact events with specialties including transient simulations, high strain-rate material characterization, modeling of failure mechanisms, and data processing and analysis. Veryst has served a wide range of industries in this area, such as consumer electronics, sports equipment, consumer appliances, and petrochemical engineering.

Can we help? Just want to keep in touch?