ABQ014

Abaqus: Temperature-dependent nonlinear visco-hyperelastic model with stress softening

Description
This test program is recommended for modeling the temperature effects of nonlinear viscoelastic rubbers and other polymers that also exhibit stress softening, also known as Mullins effect.

Abaqus Keywords
* HYPERELASTIC
* MULLINS EFFECT
* VISCOELASTIC, NONLINEAR
* TRS

Test Program
We recommend the following base tests:

Test ID

Description

# Temps

# Rates

# Repeats

# Specimens

UT003 – CT/HT

Tensile test

3

1

2

6

UT004 – CT/HT

Load/hold tensile test

3

2

2

12

Depending on the complexity of loading or deformation, we may recommend the following additional tests:

Test ID

Description

# Temps

# Rates

# Repeats

# Specimens

PT003

Planar tension test

3

1

2

6

PT004

Load/hold planar tension test

3

2

2

12

UC003

Compression test

3

1

2

6

UC004

Load/hold compression test

3

2

2

12

VC003

Volumetric compression test

3

1

2

6

VC004

Load/hold volumetric compression test

3

2

2

12

Notes

  • Testing at 2 or more rates is recommended to capture the nonlinear behavior of the material.
  • Suggested testing at 3 temperatures may be revised depending on the range of temperatures of interest and the material.
  • UC003 and UC004 may provide non-homogeneous stress/strain data.  Inverse calibration procedures may be necessary.
  • VC003 and VC004 are not needed for an incompressible material.
  • Veryst will provide a calibrated material model (either a built-in Abaqus or PolyUMod® model) for the observed response and the material.
  • The resulting set of parameters can be used directly in Abaqus CAE or the input file.


Specimen Requirements

  • 25 tensile (dog-bone) specimens
  • 25 planar tension specimens
  • 25 compression cylinder specimens
  • 25 volumetric compression specimens


See the description of individual tests for details on specimen geometries.  Note that we request extra specimens to ensure a sufficient supply of specimens for valid testing.

Veryst can also assist in molding standard and non-standard test specimens.  Please contact us if you are interested in discussing this option.


Additional Validation
Veryst can perform additional validation, depending on the target material and the simulation application, through any of the following tests and any necessary component level FE simulation:

  • Impact testing
  • Micro-to-macro indentation responses
  • Cyclic tests with loading/unloading between different strain levels and zero stress level at different rates


More information
For a customized quotation, please write to us at testing@veryst.com and indicate the Test ID (ABQ014), type of material, test temperatures, specimen geometries available, or other relevant details.

Can we help? Just want to keep in touch?