News & Events

MEMS

MEMS and Sensors expert interviewed for the Future of Housing Workshop 2017

Allyson Hartzell participated in this workshop focused on exploring opportunities for “radical innovations” for creating safe, healthy, and affordable housing.  Ms. Hartzell provided insight into the use of MEMS and sensors in future housing projects.
COMSOL Certified Consultant logo

Gold Sponsor of COMSOL Conference 2017

Veryst’s Dr. Stuart Brown delivered a keynote presentation titled “Using Multiphysics to Diagnose the Cause of a Toxic Leak” at this years event (watch a video of the presentation). Veryst also presented a workshop “Modeling of Rubbers and Thermoplastics Using the PolyUMod® Library.”
Microfluidics

Presentation at Lab-on-a-Chip Conference 2017

Dr. Matthew Hancock spoke about "Modeling and Simulation of Microfluidic Devices," addressing how an array of modeling tools such as scaling arguments, analytical formulas, and finite element simulations may be leveraged to address microfluidic device development issues.
Peristaltic pump

Webinar on mechanical contact modeling with COMSOL Multiphysics

Dr. Nagi Elabbasi led a one-hour webinar in which he showed how to set up and solve a wide range of mechanical contact problems using COMSOL Multiphysics.
Schematic Image of Hose

Presentation on polymers at the Zurich University of Applied Sciences, Switzerland

Dr. Jorgen Bergstrom was invited to speak at the Conference on Polymer Modeling in Winterthur, Switzerland. His presentation was titled “Predicting Failure and Fatigue of Polymers.”
COMSOL Blog header

COMSOL blog features Veryst's work simulating bonding of underfill adhesives

Veryst’s simulation expertise was highlighted in a COMSOL blog that describes how Veryst simulated the flow and cure of a non-conductive film during the thermocompression bonding process.
MEMS

Veryst presentation at MEMS Testing & Reliability 2017

Allyson Hartzell's presentation—"Brief History, Current Status, and Emerging Trends"—addressed the newest evaluation methods, the pros and cons of long term reliability testing, emerging trends, and system-level reliability and design-in features for MEMS lifetime and data security.
SES 2017

Presentation at SES 2017

Dr. Jorgen Bergstrom co-authored a paper titled “Mechanical Properties of 3D Printed Polymeric TPMS Cellular Materials.” Three types of TPMS (triply periodic minimal surfaces) are used to generate polymeric cellular materials and this paper investigates computationally and experimentally their mechanical properties. 
Microfluidics

Presentation at Organ-on-a-Chip World Congress & 3D Culture 2017

Dr. Matthew Hancock's presentation, "Modeling and Simulation of Microfluidic Organ-on-a-Chip Devices," addressed how an array of modeling tools such as scaling arguments, analytical formulas, and finite element simulations may be leveraged to address these microfluidic organ-on-a-chip device development issues.

Can we help? Just want to keep in touch?